7 Tips About How Much Is A Ghost Immobiliser That Nobody Can Tell You
Ghost 2 Immobiliser Problems
The Ghost 2 immobiliser, designed to safeguard cars from hacking or key cloning, is a small device that can be installed without damaging your vehicle. It stops you from starting your car unless you enter the correct sequence of keys in your vehicle. This is similar to the mobile password.
Stop/Start
Ghost Immobilisers protect vehicles from being stolen by stopping the engine from running until it has the correct PIN code. This is done without modifying the vehicle, and is largely undetectable by thieves. The unit communicates with the ECU on the CAN data bus to disable the vehicle. This system is like the one automobile manufacturers have been using in their cars for many years however, the criminal cannot add a new key or utilize key relay technology to bypass it as they could with factory-installed systems.
A Ghost can be fitted to any vehicle, van motorhome, caravan, or bicycle that has an engine. It is compatible with all popular makes of vehicles. The same system can also be used on electric vehicles. It's a great alternative to steering wheel locks and wheel clamps, and can be installed with minimal effort.
When the Ghost is activated, it will stop all buttons in your car and prevent the ignition being started without a PIN number. You can enter the code by hand or using the Android or Apple app. If a code that is incorrectly entered, the app will display an indicator light and the Ghost will not allow the vehicle to be started again. This is a great deterrent and when the vehicle isn't started the thief will then move on to a different area of.
The Ghost is a weatherproof, small device that can be tucked behind the most difficult-to-access parts of your vehicle. It is incredibly easy to install with an average of 20-30 minutes per vehicle. It is also easy to remove if you choose to switch vehicles, or give it to an auto repair shop or valet parking. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is recognized by a few insurance companies. It also features an emergency security feature that is secured by Pin Code Override, and a Service/Valet mode which can be activated by pressing a button on the app, or by using your key fob.
Disarm
Contrary to the mechanical devices, which can be removed, ghost immobilisers are hidden and integrated into the car. Even if they were discovered and stolen, thieves would not be able start the car. They are almost impossible to bypass or hack. This is because ghost immobilisers prevent key hacking, signal jamming and device spoofing - techniques that are commonly used by thieves to gain access to vehicles that have standard immobilisers.
An immobiliser functions by sending a code to the ECU (electronic control unit). If a wrong code has been received and the vehicle does not start as the engine won't fire up. Although it is possible to disable the ghost immobiliser with a software tool this is very laborious and time-consuming. Only an authorised installer can install and use the software.
The Ghost immobiliser is a small device that is tucked away in the wiring loom cost of ghost immobiliser your vehicle and is not visible to the naked eye after it has been installed. It doesn't show up on diagnostic systems. There are no LED indicators and it does not communicate with the engine through the OBD port. It communicates silently through the CAN data loop.
The system will stop the vehicle from starting until it is able to receive a user-defined PIN code sequence. This is entered through buttons on the steering wheel and door panels as well as the central console. This is a safer method of protecting your vehicle as it does not require the use of keys or remote control.
In addition to this Ghost also has the option of a service mode that can be activated through the application on your mobile phone. This will allow you to hand over your keys to someone for servicing or valet parking without entering the disarm sequence.
Whether your Ghost is in service mode or not you should not attempt to remove the system on your own since it could impact your engine and cause damage. It is recommended to contact an TASSA verified installer who can remove the system safely and correctly. Our newest GHOST immobilisers have a specific fingerprint QR sticker that is hidden in various areas of your vehicle. They are connected to our security register. In the event that the system is removed and later sold on the blackmarket it will be able to trace the original owner.
Anti-Hijack
The anti-hijack feature is a very important feature of the Ghost Immobiliser 2. This system is a smart key that guards your car from thieves. If the ignition switch is turned to on, and the vehicle remains stationary for a period of 30 seconds, the Ghost system will automatically stall the engine and turn the warning lights on. This gives the driver and passengers enough time to press the security button before the system is activated.
The Ghost system, unlike many competitors, utilizes an electronic timer and controller that shuts off the valve that shuts off fuel after a predetermined period of time. This is regardless of whether the ignition is on. The delay time frame must be sufficiently long to allow the victim of the vehicle to drive away from the scene of the incident and to maintain a sufficient distance from the stalled vehicle before the system can reactivate.
In addition to the standard CANbus immobiliser blocking capabilities of the Ghost, it has an additional level of security that prevents common methods of hacking used to gain access to modern vehicles like relay attacks keys range extending, relay attacks and ECU swapping. This is due to the fact that the ghost immobilise system communicates in a quiet manner and does not emit any signals that could be picked up by thieves using code grabbing or RF scanning technology.
The Ghost system comes with an option for service or valet mode that allows your vehicle to temporarily be started and driven, without the requirement for a PIN code. This is great when you park your vehicle and only require it to be left for a short time in order to open the garage door or put groceries in the boot. The system will end service mode based on speed and time or via the simple PIN code entry process that gives you total peace of mind that only YOU are able to use your vehicle!
Keyless Entry
Many customers are now seeking additional security measures because of the growing trend of contactless car theft. This is especially true for those who invested time and money into customising their vehicles or own expensive automobiles. Add-on immobilisers can be an effective way to prevent this kind of theft because they will stop your vehicle from starting until proper pin code is entered along with your key fob.
Immobilisers are designed to impede the various circuits in a vehicle such as those that control the starter motor and fuel pump. They can also turn off the car ghost immobiliser alarm to attract attention and ward off potential thieves.
These devices communicate with the engine control unit (ECU) via the CAN data circuit and they stop the thief trying to bypass it by installing a new ECU or using a key programmer. These immobilisers are put in place discreetly and leave no marks on your vehicle. They are also unnoticeable by sophisticated tools used by thieves.
In contrast to other systems that require a specific application, or a tag to be carried on the person of the driver the Ghost immobiliser is only disarmed by pressing a pattern of existing electronic buttons on your steering wheel, door panel and central console, allowing you to select a customized pin sequence. The pin can be changed as often as you like, meaning it is as secure as a credit card and can be more difficult to crack due to it requiring up to 20 press.
Ghost also has the option of a valet/service mode that allows you to disable the system if your vehicle is to be turned over for valet parking or services and allows it to operate within predetermined guidelines, such as a 30mph speed limit which means you don't need to worry about your vehicle being driven at a reckless speed. It is then reactivated with the original key or the appropriate entry code.
Installed by our reputable installers and certified installers, it is the most secure and efficient aftermarket CAN-immobiliser available. It is also accepted by Thatcham for insurance purposes. The Ghost 2 immobiliser is also equipped with six QR fingerprint labels, an ISR contact card containing your unique QR code, as well as an emergency number that is secure which you keep in the wallet/purse of your car.